Modern reality dictates its own rules, and it is already difficult for most people to do without the use of virtual private networks (VPNs). This is due both to the need to protect data from leakage and to the desire to use network resources, access to which is limited in a certain territory.
If you use multiple devices in your home Wi-Fi network or an internal network of an organization, it is advisable to set up a VPN connection on the router so that you do not need to install and configure a VPN on each device. Read below in more detail about what VPN is, what is the specifics of configuring your router to use a VPN, and what benefits it can bring in general. Get a complete guide to setting up a VPN on a router and go through all the steps described without any difficulty!
What Is a VPN and for What Purposes Is It Used?
VPN is a technology that allows organizing a local network over another network (most often the Internet). It is used to protect the user’s online anonymity. VPN hides location data and encrypts traffic, thus preventing hackers from getting any data about the user. But this is not the only VPN application. The list is much wider. Here are the main purposes for which VPN is used today:
- Encryption of user’s Internet traffic;
- Privacy protection;
- Blocking dangerous sites, ads, and trackers;
- Access to content that has geographic restrictions, etc.
Setting Up a VPN on a Router: Simple Steps to Follow
If you decide to use a router-based VPN, choose it carefully and check if the connection to the router is maintained. After that, you should check whether your router is capable of being used as a transit device. Many used models do not support the direct installation of the VPN service, so flashing is required. On the websites of service providers there are instructions for installing VPN services, but not for flashing. Sometimes you can do it yourself. But this requires special knowledge and skills.
The specifics of connecting a VPN wireless router differ depending on the brand and model, but there are several common steps:
- Login to the router. You need to be able to configure options to install the required service. For most router models, you need to enter the IP address of the router in the browser search bar. The form will be placed on the opened page of the site. You must provide a username and password to access settings;
-
Setup VPN. The steps you need to take depend on the firmware type of your device. Certain models are equipped with a built-in VPN service from the manufacturer, so setting up VPN for your router will not be difficult. For others, you need to edit the settings to redirect traffic to VPN servers. In any case, do the following:
- Go to the web interface of the router as described in the user manual. It is usually located at 192.168.0.1. or 192.168.1.1;
- If there is a “VPN client” section in the menu, you should use it. Your router is prepared to work with VPN and no problems are expected;
- If the “VPN client” section is missing, try creating a new WAN connection. Find the menu item “WAN” or “Internet”. Sometimes it is located in the root menu or in the “Connections”, “Network”, and “Settings” sections. Create a new connection and select the required protocol on the page that opens;
- When choosing PPTP and L2TP, you will need to enter the data received from the VPN for wifi service during registration. This includes the server address, password, and login. It is often required to enter the IP addresses of the DNS servers. You should also set the receipt of the IP address from the server (Dynamic IP);
- Look on the website of the VPN service for a description of the settings of routers. Even if your model is not there, see what parameters you need to enter;
- Save the settings and wait for the connection to the WAN. You may need to reboot your router. If the setting up a VPN on a router connection does not occur, try disabling IPv6 in the router settings, find the VPN Pass-through option, and make sure it is enabled or disable NAT for clients;
- Check connection. You need to make sure the connection is working correctly. In case of problems with setting up a VPN on a router, it is recommended to contact the technical support of your VPN provider.
VPN for Your Router: Key Benefits
Using a router based VPN provides many benefits, including the following:
- Permanent privacy and security on the Internet. If necessary, the VPN service will be constantly active. There is no need to further secure the connection;
- Whole house security. Systems that are connected to a home VPN wireless router will be in continuous coverage. VPN provides protection for new devices without additional settings;
- Protection of devices that do not support VPN protocols, but access the Internet via Wi-Fi;
- Provides simultaneous connection of many gadgets. You can link 5-6 devices that are perceived as one.
So, in this article, we have told you how to configure a VPN for your router. Everything is very simple. Follow all the steps described above and get results!
Also, See:
- How to Find Mac Address on Windows 10
- Some Funny Wi-Fi Names You Should Consider
- How to Fix “We couldn’t connect to Instagram” Error
Found this post helpful?
- How to Fix “Can’t setup the recorder now, please try again later” on WhatsApp - September 18, 2024
- What is Cleaving Potential in Space Marine 2? - September 18, 2024
- Can You Play Operations Solo in Space Marine 2? - September 18, 2024
59 thoughts on “Configuration Guide: How to Setup VPN on Your Router”
Comments are closed.